Root and Install TWRP Recovery on Gionee GN5001

Root and Install TWRP Recovery on Gionee GN5001, How to Root Gionee GN5001, Install TWRP Recovery on Gionee GN5001, Root Gionee GN5001 Using supersu

Root and Install TWRP Recovery on Gionee GN5001

Here this article regards to those guys who like to explore with android. We are talking about those guys who don’t like to be bounded with limited features. When we talk about Rooting an Android device that means you will get full access on your android device. So here in this guide we Updatemydroid will guide you that how easily, safely and quickly you can Root and Install TWRP recovery on Gionee GN5001. So let’s begin….

Gionee GN5001 Features:- 
  • Device type: Smartphone
  • Design: Classic
  • Dimensions (H/L/W): 143 x 69.9 x 8.5 mm, vol. 84 cm³
  • Display: LCD IPSColor (16M) 720x1280px (5.0″) 294ppi
  • Touch screen: yes
  • Weight: 182 g
  • Time GSM (talk/stand-by): 40 / 800 hrs. (33.3d)
  • Battery: Li-Po 4000 mAh
  • Built-in memory: 16 GB
  • Memory card: MicroSD
  • RAM memory: 1 GB
What is Root Access on Android Device

If you are aware of jailbreak on iOS platform then you will easily understand about the root access. Basically, Root access is advanced access by a user on its android device. By root access you have control on every single part of your device. As usual, everything that exist in this world has both sides for example benefits and disadvantages. You can Root and Install TWRP recovery on Gionee GN5001

 Advantages of rooting an android device:- 

– You get full access on every part’s functionality of your android device.
– ‎You can install custom recovery like TWRP or CWM.
– ‎You can taste custom ROMs.
– ‎Install custom kernels.
– ‎Install Audio Mods.
– ‎Enhance battery life.
– ‎Remove bloatware.
– ‎And much more.

Disadvantages of rooting an android device:-

– Your device’s warranty will be void.
– ‎Lack of correct procedure or not followed a procedure accurately may hard brick your device.

What is TWRP recovery

After rooting an Android device a user perform is to install a TWRP recovery. A TWRP custom recovery let a user install various Mods on its android device. You can flash custom ROMs, custom kernels, custom audio Mods, flash Xposed framework and much more. Know about how to Root and Install TWRP recovery on Gionee GN5001 read below article.


– This guide is only for Gionee GN5001.
– ‎Make sure to have a complete backup of your device.
– ‎You must have installed minimal ADB and Fastboot on your computer.
– ‎You must have installed all Gionee GN5001 USB drivers on your computer.
– ‎Make sure to charge your device more than 75%.
– ‎A USB cable.
– ‎We will not responsible if you brick your device.
– ‎Working internet connection to download the file.
– ‎Have patience and working mind.

Download TWRP recovery for your Gionee GN5001 (3.2.1 – 1)

Steps to Install TWRP recovery on Gionee GN5001:-

– First of all make sure you have completed all steps of prerequisites.

– ‎Now power off your device.

– ‎Now boot your phone into fastboot mode by press and hold Volume Down + Power button simultaneously.

– ‎Now connect your device to your computer through a USB cable.

– ‎Now navigate to ADB and Fastboot folder.

– ‎Here, press and hold Shift Key and right-click on the empty space inside the folder.

– ‎Here select Open PowerShell window here or Open command window here.

hoe to root, how to install twrp recovery

– Now type below command to verify your device is connected properly:-

Window users:- fastboot devices

Mac users:- ./fastboot devices

Note:- Here your device will be listed if you have connected your device properly. If it does not list your device than replace the USB cable and try again.

– Now type below command to boot your Gionee GN5001 into Fastboot mode:-

Window users:- adb reboot bootloader

Mac users:- ./adb reboot bootloader

– Now type below command to flash TWRP recovery:-

Windows users:- fastboot flash recovery recovery.img

Mac users:- ./fastboot flash recovery recovery.img

– Now type below command to reboot your device:-

Mac users:- ./fastboot devices

Widows users:- fastboot devices

– Congratulations!! You have successfully installed TWRP recovery on Gionee GN5001. Enjoy!!

Download latest

Download Magisk Manager apk

Guide to Root With SuperSU Zip 

Steps to Root Gionee GN5001 (Using Magisk):-

– First of all make sure you have completed all steps of prerequisites.

– Here move the above downloaded in the root of your SD card.

– Now power off  Gionee GN5001.

– Here boot your device into TWRP recovery mode by press and hold volume down + power key simultaneously.

– In TWRP recovery, select Install then browse and select file.

– Here swipe to confirm the installation.

– Now select reboot option to reboot your device.

– Congratulations!! You have successfully rooted Gionee GN5001 with Magisk.

Comment below friends if you face any problems while root or install TWRP recovery on Gionee GN5001. Stay tuned with Updatemydroid to get regular updates on Gionee GN5001 development. Enjoy!!!


Please enter your comment!
Please enter your name here